Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (2024)

All these colorful wires don’t mean a lot to people who don’t have any electrical knowledge. But the truth is that these colors are hiding quite a lot of information that might, at one point, come in handy.

Table of Contents

Thermostat Wire Diagram – Color Code – The red wire is the one that powers the thermostat, the green wire connects to the fan, the white wire is connected to the heating system, and the yellow wire is responsible for the cooling system. Smart thermostats usually have a common wire that is either blue or black.

Note: We earn a small commission on purchases, at no additional cost to you.

Thermostat Wire Diagram – Color Code – Meaning and Purpose

Color-coded wires make it easier for technicians and regular homeowners to identify which wire is responsible for what. However, do bear in mind that it doesn’t always mean that the wire of one color has to be connected to the port of the same color.

Are Thermostat Wires Color Coded?

The absolute majority of thermostat wires are color-coded. This will help you fix the device if it ever goes bad or install a new thermostat.

Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (1)

Here are the most common thermostat wire colors and the ‘meaning’ behind them. Thermostat Wire Code.

Color of the WireTerminalDetails
White Thermostat WireWConnects to the heating system and terminates at the furnace or air handler.Your thermostat can have more than one white wire if your HVAC system has a few heating stages.
Yellow WireYConnects to the cooling system (your air conditioner). These wires go through the air handler and terminate at the compressor contactor.
Green WireGConnects to the fan of the air handler or furnace (and terminates there).
Red Wire R/V, Rc, RhConnects to 24VAC (Rh for heating, Rc for cooling). If you don’t have a dual transformer setup, then the Rh wire can be marked as R.
Blue Wire ThermostatBThis is a common wire that is connected to the heat pump. Your HVAC system is going to need a common wire if it has to be connected to a power source 24/7.

Read: HVAC Thermostat Problems

What Color Thermostat Wire Is Common?

The majority of smart thermostats require a C wire or the ‘common’ wire. It is a wire that powers the LED screen, internal processor, and Wi-Fi connection.

This common wire enables a continuous flow of 24VAC power to the device. Though the power is flowing from the R wire, the C wire is the part that makes the flow continuous by completing the circuit.

If you used to have a regular thermostat and you are now considering switching to a smart device, then the chances are high that you’ll need to run a new cable from the HVAC unit that is going to be the C wire.

The color of this wire is not standardized. Usually, it’s either blue or black; however, if the installer did his own rewiring, then the common wire can be of any color.

Have a Question? Ask HVAC Technician

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

Read: No Power To The Home Temperature Thermostat – Troubleshooting Guide

What Is the Blue Wire for On a Thermostat?

Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (2)

A blue wire is usually the common wire.

Homeowners that have a heat pump, in general, have blue common wires (if there is no heat pump, then the color might be black).

The wire connects to the B terminal and allows the thermostat to constantly be connected to the power source. This helps control the device’s ‘smart’ aspects.

Nest Thermostat Wire Colors

Nest wire colors can vary, however:

  • Common wires are, in general, blue
  • If you have a heat pump and there is an orange wire in the connector labeled W and O/B, then put it in the thermostat’s O/B connector.
  • If you don’t have a heat pump and there is a white wire in the connector labeled W and O/B, then put it in the device’s W connector.

How Do You Identify Thermostat Wires?

Before beginning any electrical project, you should turn off the power to the device at the circuit breaker. Ideally, you would want to use insulated tools and high-voltage rubber gloves.

If you are not familiar with how electricity works and anything wire-related, then it would be better to call a professional to take care of the job.

To identify the thermostat wires, you should:

  • Turn the thermostat and the HVAC unit off.
  • Locate the HVAC control board – this is where the thermostat wires connect to the heating and cooling system.
  • The wires will most likely be color-coded. They should also be labeled.

Read: Why Does The Room Temperature Not Match The Thermostat Setting?

What Are the 7 Thermostat Wires?

Different systems can have a different number of wires.

The chances are high that you’re going to have a 7-wire thermostat, if you have a heat pump or a system that controls your home’s humidity or ventilation.

Heat pumps need a wire to control the reversing valve and one to control auxiliary heat.

2-Wire Thermostat Wiring Diagram

If you can see only two wires, then it looks like you have a thermostat that can provide heat only.

Usually, the two colors are red and white. The red one powers the thermostat and the white wire is responsible for heating.

4-Wire Thermostat Wiring Color Code

This configuration is generally used with battery-operated thermostats or devices that regulate heat only.

The red wire powers the thermostat, the white wire connects to the heating unit, the blue wire is the common wire, and the green wire is connected to the fan.

Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (3)

5-Wire Thermostat Wiring Color Code

The most common configuration for HVAC systems that provide both heating and cooling.

You’ll have the red, green, white, and common wire (blue or another color), as well as a yellow wire that is responsible for cooling.

Read: HVAC UV Light: Everything You Need To Know

6-Wire Thermostat Wiring Color Code

You’ll have a 6-wire thermostat if your system has two stages of heat and one stage of air conditioning.

Two-stage heating systems have a low setting and a high setting.

Apart from the red, green, white, yellow, and black or blue common wire, a 6-wire thermostat will also have a brown wire that connects to second-stage heat and terminal W2.

8-Wire Thermostat Wiring Color Code

Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (4)

You might have an 8-wire thermostat, in case your HVAC system has auxiliary heat (can be brown, terminal E) and, perhaps, a two-stage cooling system (second-stage cooling wire might be light-blue and connected to terminal Y2).

Read: Why Does Home Thermostat Say HEAT ON But There Is No Heat?

What Do Thermostat Wiring Letters Mean?

Most thermostats follow the same standard lettering system. However, the instructions provided below are not universal.

In order to avoid any mistakes, it is always better to consult the diagram provided by the manufacturer.

Terminal LetterWhat It Means
GThe terminal controls the fan and is connected to the green wire
R/Rh/RcThe R terminal is the 24V power supply; Rh is for heating power supply; Rc – cooling power supply
Y/OThis terminal controls the cooling
W/BControls the heating
CThe common wire’s terminal

Usually, the letters stand for the color of the wire that is connected to that particular terminal (R – red, for example).

Does R Go to RC or RH?

The often-red R wire is the wire that powers the entire HVAC system. If you have both, an Rh and an Rc wire, then the R wire can be connected to any of those.

If you have just the R wire, then it has a single R connector.

In a single-stage heat pump system and a 4-wire heating and cooling system, the Rc and Rh terminals are jumpered together. However, that’s not the issue in a 5-wire system.

What Happens If You Wire a Thermostat Wrong?

If you don’t have basic electrical knowledge, then it’s better to leave the installation of a thermostat to a professional.

What will happen if you wire the device incorrectly? If you are lucky, the thermostat will simply not function.

However, the other consequences of such a mistake can be a bit more serious. You might…

By the way, a professional will not only find the perfect wiring configuration for your device but will also suggest the right location for the thermostat.

Related Posts

  • HVAC Thermostat Problems

    Let’s discuss the most common thermostat problems and how you can avoid these unpleasant issues.…

  • Home Thermostat Says HEAT ON, But no Heat? 7 Quick Checks

    Seeing that your home thermostat says heat on, but no heat is actually coming from…

  • White Rodgers Thermostat Troubleshooting

    You don’t have to be an expert, in order to perform some basic thermostat troubleshooting.…

  • Aux Heat On but No Heat? Why Auxiliary Heat Isn't Working

    When winter hits and it’s freezing outside, you can find yourself truly grateful for the…

  • When to Turn Heat On?

    The leaves are turning yellow, the temperature is beginning to drop, and, consequently, you start…

Thermostat Wire Diagram - 8 Color Codes Made Easy - HVAC BOSS (2024)

FAQs

What are the color codes for thermostat wires? ›

5-Wire Thermostat

Red, R wire: The red wire provides the necessary 24V power. White, W wire: This wire signals when it's time to use conventional heating to heat your home. Green, G wire: It operates your HVAC fan. Yellow, Y wire: This wire signals your air conditioner to start the cooling process when needed.

What happens if you wire a thermostat wrong? ›

If you put wires into the wrong thermostat connectors during setup can, this can cause your system to malfunction or possibly damage it.

What color thermostat wire controls the compressor? ›

The yellow wires on your thermostat connect to your compressor. They control your air conditioning system by turning the compressor on and off. The yellow wires connect your thermostat to your compressor contactor via the air handler. The yellow wires connect to the Y terminals on your thermostat.

What is the order of the wires on a thermostat? ›

5 Thermostat Wire System

This configuration includes a 24-volt red wire for power, a white wire for the heating elements, a yellow wire for the AC unit, a green wire for the fan component, and a common wire which is most likely blue but could be a different color.

What if there is no C wire for a thermostat? ›

While your thermostat may not technically need a C-wire to operate, it gets the power for its screen and Wi-Fi capabilities through “phantom power” or “power stealing.” Basically, this means your thermostat gets a kick of extra power whenever your HVAC system is running.

What code does a bad thermostat throw? ›

Error code P0128 indicates that your engine coolant temperature is below the thermostat regulating temperature. This means that your Engine Control Module (ECM) or Powertrain Control Module (PCM) has recognized that your engine is running cooler than it's supposed to.

What happens if you touch two thermostat wires together? ›

Most thermostat wires operate on 24-volt power provided by a transformer, and they are generally safe to work on without shutting off the circuit feeding the thermostat wiring. However, if the low voltage wires touch each other during the work, the system's internal fuse will blow.

What color is the C wire for HVAC? ›

Blue Or C Wire

The blue wire—also called the C, or “common,” wire—is required to power any thermostat and ensure proper system function. Your HVAC system and thermostat configuration will determine what color the C wire will be. The C wire in homes with a heat pump is always blue.

What color is the OB wire on a thermostat? ›

Orange for O and Dark Blue for B. (Rheem and Ruud will usually utilize the blue wire for reversing valve. If you have a Trane, Carrier, Goodman, Lennox, Ducane, Heil, Fedders, Amana, Janitrol, or any other manufacturer other than Rheem or Ruud you will be utilizing the orange wire for the reversing valve.)

What does RC and RH mean on a thermostat? ›

Each has its own 24 volt transformer. The Rh is for the heating controls. while the Rc is for the cooling controls. In case you have only one 24 V transformer for both units (rare) ,the Rh+Rc are bridged, so the thermostat can provide 24 V signal to each selected (heating (W) or Cooling (Y)) edited Nov 21, 2022 at 2:03.

Which thermostat wire is for cooling? ›

Blue or Black (C): The Unsung Hero
Wire ColorTerminalFunction
White (W)HeatHeating system activation
Yellow (Y)CoolCooling system activation
Orange (O)Heat/CoolReversing valve control (for heat pumps)
Green (G)FanFan control for air circulation
3 more rows
Sep 6, 2023

What do RH and RC mean on a thermostat? ›

RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system but not in a five-wire heating/cooling system.)

How to hook up a thermostat with 4 wires? ›

Attach the red wire to the R terminal (Call for heating and/or cooling). Attach the green wire to the G terminal (Fan). Attach the white wire to the W terminal (Heat). Attach the yellow wire to the Y terminal (AC).

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Merrill Bechtelar CPA

Last Updated:

Views: 6135

Rating: 5 / 5 (70 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.